Our Products
Sunlight-readable, weatherproof and energy-efficient. Aaztec’s Shine Series is a commercial-grade outdoor LED display built for advertising, digital signage and 24/7 public visibility.
Nits (Shine)
Front & Rear
Refresh Rate
Lower Power
Operation Ready
The Shine Series by Aaztec is a commercial-grade outdoor LED display engineered for high-impact advertising and digital signage. It is designed to stay clearly visible under harsh, direct ambient sunlight, where ordinary screens look washed out. With brightness of up to 10,000 nits and an energy-efficient architecture, it turns busy roads, building facades and open plazas into dependable media spaces.
Unlike a basic billboard or an indoor panel pushed outside, this outdoor LED video wall is built around weather, heat and long operating hours from the start. Its aluminum die-cast cabinet, IP67 sealing and dual-side maintenance access keep the screen bright, protected and easy to service for years.
Every feature of the Shine Series solves a real problem faced by advertisers and facility managers who run screens outdoors.
Up to 10,000 nits and a 5000:1 contrast ratio deliver vivid, punchy graphics in full daylight.
IP67 front and rear protection shields internal electronics from heavy rain, moisture and dust.
A 960×960 mm aluminum die-cast cabinet adds rigidity and natural heat dissipation without heavy cooling systems.
A low-voltage driven setup cuts power consumption by 30% compared with traditional outdoor screens.
Front and rear maintenance access reduces long-term downtime and structural service costs.
A 3840 Hz refresh rate removes flicker, ideal for high-motion video and camera capture.
| Attribute | Specification Details |
|---|---|
| Manufacturer | Aaztec |
| Pixel Pitch Options | 4 mm / 5.7 mm / 6.6 mm / 8 mm |
| Maximum Brightness | Up to 10,000 nits |
| Contrast Ratio | 5000:1 |
| Refresh Rate | 3840 Hz |
| Cabinet Material | Aluminum die-cast |
| Cabinet Dimensions | 960 mm × 960 mm |
| Ingress Protection | IP67 (Front and Rear) |
| Maintenance Profile | Fully dual-accessible (Front & Rear) |
Brightness is measured in nits, and it decides whether your message is seen or ignored. Indoor screens usually run at a few hundred nits, which is far too low once sunlight hits the surface. A high-brightness outdoor LED display must outshine ambient light, so the content stays readable from the pavement, the road or a moving vehicle.
Contrast works alongside brightness. A strong contrast ratio keeps blacks deep and colours rich, while a high refresh rate keeps footage steady when people record the screen on their phones. Together, these qualities make a sunlight-readable LED screen effective for brand campaigns, live announcements and event promotion.
Quick tip: Direct sunlight generally calls for 5,000 nits or more. If your screen faces the sun for much of the day, choose the highest brightness available.
For projects that need a slightly different balance, Aaztec also offers the Outdoor Display Glow Series. The Glow Series is a high-brightness outdoor LED display designed for environments where visibility, durability and continuous operation all matter. It delivers up to 6500 nits, a 3840 Hz refresh rate, a 10,000:1 contrast ratio and IP65 protection, helping maintain clear visuals in demanding outdoor conditions.
Crystal-clear visibility even in direct sunlight.
Built for 24/7 outdoor operation in any climate.
Vandal-resistant tempered glass and a durable metal housing.
Consistent colour and clarity from any perspective.
Industrial-grade components for continuous use.
Available in standard and ultra-wide display options.
These Glow outdoor LED screens bring high-definition clarity and 24/7 reliability to professional applications, from retail frontage to corporate campuses. Every unit can be paired with the AX-C02 LED Multimedia Player and Controller, a high-performance all-in-one unit for content playback and control.
| Specification | Details |
|---|---|
| Display Type | Surface Mount Device (SMD) |
| Pixel Pitch | 2.5 / 3 / 4 / 6 / 8 mm |
| Cabinet Material | Carbon-Steel / Aluminum Die-Cast |
| Cabinet Size | 960 mm × 960 mm |
| Brightness | Up to 6500 nits |
| Contrast Ratio | 10000:1 |
| Refresh Rate | 3840 Hz |
| IP Rating (F/R) | IP65 / IP65 |
| Application | Outdoor |
| Point | Shine Series | Glow Series |
|---|---|---|
| Maximum brightness | Up to 10,000 nits | Up to 6500 nits |
| Contrast ratio | 5000:1 | 10000:1 |
| Protection | IP67 front & rear | IP65 front & rear |
| Pixel pitch | 4 to 8 mm | 2.5 to 8 mm |
| Best for | Direct-sun, high-exposure sites | Detail-rich content and closer viewers |
Pixel pitch is the distance between two pixels in millimetres. A smaller pitch gives a sharper image for viewers standing close, while a larger pitch suits distant audiences and saves cost. As a rough guide, the minimum comfortable viewing distance in metres is close to the pitch value in millimetres.
shop fronts, malls and pedestrian areas.
building walls, entrances and campus displays.
highways, large hoardings and long-distance viewing.
Our display experts can recommend the ideal pitch after assessing your site and audience.
An outdoor video wall from Aaztec works wherever people gather or travel, day and night.
roadside hoardings, junction screens and rooftop installations.
eye-catching storefront promotions and offers.
airports, bus terminals and railway stations for live updates.
event announcements and wayfinding.
scoreboards, live feeds and sponsor content.
hotel facades and resort entrances.
Aaztec designs LED displays and controllers for Indian conditions, with strong local support and quick access to spares. From planning to installation, our team stays with you.
of indoor and outdoor LED displays, controllers and signage solutions.
technical assessment and a quote tailored to your project.
through energy-efficient design and easy servicing.
to keep every screen running smoothly.
We provide premium LED display rental services across India and major cities:
Direct sunlight usually needs 5,000 nits or more. The Shine Series reaches up to 10,000 nits and the Glow Series up to 6500 nits.
It carries an IP67 rating on the front and rear, protecting against heavy rain, moisture and dust.
Shine offers higher brightness and IP67 protection. Glow offers a 10,000:1 contrast ratio, IP65 protection and finer pixel pitch options from 2.5 mm.
Yes. Both series use industrial-grade components built for continuous operation.
Pick by viewing distance: finer pitches for close audiences and larger pitches for highways and open areas. Our team can guide you after a site assessment.
Our team of experts at Aaztec specializes in providing top-quality solutions that are visually stunning and effective at grabbing the attention of your target audience. We provide top-notch displays, from single screens to eye-catching LED video walls. Contact Aaztec India for all of your digital display needs!
Tell us your display size, location, and use case — we’ll send you a detailed quote with product specifications within 4 business hours.